- Information
- AI Chat
15 - sss
cyber security (INTE2557)
Royal Melbourne Institute of Technology
Recommended for you
Preview text
Packet Tracer - Logging Network Activity
Addressing Table
Device Private IP Address Public IP Address FTP_Server 192.168.30 209.165. SYSLOG_SERVER 192.168.11 209.165. Router2 N/A 209.165.
Objectives
Part 1: Create FTP traffic. Part 2: Investigate the FTP Traffic Part 3: View Syslog Messages
Background
In this activity, you will use Packet Tracer to sniff and log network traffic. You will view a security vulnerability in one network application, and view logged ICMP traffic with syslog.
Instructions
Part 1: Create FTP traffic.
Step 1: Activate the sniffing device.
a. Click on sniffer device Sniffer. b. Go to the Physical tab and turn on the power to the sniffer.
c. Go to the GUI tab and turn the sniffer service on.
d. The FTP and syslog packets entering the sniffer f rom Router2 are being monitored.
Step 2: Remotely connect to the FTP server.
b. Upload the clientinfo f ile to the FTP server by entering the command put clientinfo.
c. At the ftp> prompt, enter the command dir and verify that the clientinfo f ile is now on the FTP server.
d. Enter quit at the FTP prompt to close the session.
15 - sss
Course: cyber security (INTE2557)
University: Royal Melbourne Institute of Technology
